2 replies to this topic

[CNJRoss]

NTSB news release

NTSB Recommends Rail Tank Car Placement to Mitigate Risks of High Hazard Flammable Trains

 

12/15/2020

 

 

​WASHINGTON (Dec. 15, 2020) — The National Transportation Safety Board issued a safety recommendation report Tuesday, regarding placement of Department Transportation-111 rail tank cars in high hazard flammable trains and the use of buffer cars for the protection of train crews.

 

The recommendation requires all trains have a minimum of five non-placarded cars between any locomotive or occupied equipment transporting hazardous materials, regardless of train length and consist.

 

The recommendation stems from two separate derailments of high hazard flammable trains in Draffin, Kentucky, and Fort Worth, Texas, which resulted in breached tank cars and hazardous material fires. The NTSB is investigating both derailments.

 

The Draffin, Kentucky accident happened Feb.13,2020, when a CSX Transportation ethanol unit train derailed three locomotives, one buffer car and four tank cars on a mountainside. The high hazard flammable train had one buffer car at the head of the consist and one at the end of the train, with 96 denatured ethanol tank cars following the head buffer car. 

 

On April 24,2019, a Union Pacific Railroad train carrying denatured ethanol, derailed 25 tank cars in Fort Worth, Texas. The train consisted of three lead locomotives, two buffer cars, and 96 loaded tank cars.

 

 

(The aftermath of the Feb. 13, 2020, CSX freight train derailment is seen in this screen shot from an UAV video provided by the Pike County Emergency Management Agency Feb. 14, 2020. The train was carrying denatured ethanol in Draffin, Kentucky when the accident happened. Photo credit: Pike county emergency Management Agency, overlay by NTSB)

 

In the safety recommendation report, the NTSB found that in both derailments, least-protective DOT-111 tank cars were placed in positions that increased the risk of derailment and breaching of the tank cars, resulting in release of their hazardous materials contents. Additionally, in Draffin, Kentucky, the lead locomotives were separated from the hazardous materials tank cars by only one buffer car, which shortened the distance between the breached tank cars and the crewmembers, increasing the risk of injury or death. The NTSB concluded that the severity of the Draffin, Kentucky, and Fort Worth, Texas, accidents could have been less severe had the DOT-111 tank cars been placed in locations within the train where they were less likely to derail or to sustain accident damage.

 

“This is not the first time NTSB has issued recommendations regarding the use of buffer cars to reduce the risks of hazardous materials release to train crews,” said Robert Hall, NTSB Director of Railroad, Pipeline and Hazardous Materials. “We believe that it is imperative that these recommendations be implemented to prevent the potential for a catastrophic event.”

 

As a result of its investigations, the NTSB issued one recommendation to the Association of American Railroads, the American Short Line and Regional Railroad Association, and the Renewable Fuels Association. This recommendation addresses the placement of the most vulnerable tank cars in high hazard flammable trains, such as unmodified DOT-111 tank cars, in positions of trains where they are least likely to derail or to sustain mechanical damage from the effects of trailing tonnage or collision in an accident.

 

NTSB reiterated one safety recommendation issued to the Federal Railroad Administration, which is classified “Open—Acceptable Response.” NTSB also reiterated two safety recommendations issued to the Pipeline and Hazardous Materials Safety Administration, one classified as “Open—AcceptableResponse,” and one classified as “Open—Unacceptable Response.”

 

The safety recommendation report, which includes the findings, and all safety recommendations, is available at https://go.usa.gov/xACuQ

 

Links to the Draffin, Kentucky, and Fort Worth, Texas, accidents reports and other publicly released information about these investigations are available at https://go.usa.gov/x7GxU

 

 

[CNJRoss]

WYMT-TV, Hazard, KY 12/15/20
 

National Transportation Safety Board issues new recommendations after derailment in Pike County earlier this year

 

 

 

(WYMT) - The National Transportation Safety Board (NTSB) issued new recommendations after a derailment earlier this year in Pike County.

 

In February, a fiery crash caused part of the train to fall into the Russell Fork River.

 

The NTSB recommends all trains have a minimum of five buffer cars between any locomotive or occupied equipment transporting hazardous materials.

 

Continue here.

 

Cross-posted in Rockslide derails CSX train; crew injured and NTSB Recommends DOT-111 placement; 5 buffer cars in Flammable Trains

[CNJRoss]

BLET NEWS FLASH   

 

NTSB, BLET urge action on buffer cars to protect train crews

 

 

INDEPENDENCE, Ohio, December 18 — The National Transportation Safety Board (NTSB) issued a Safety Recommendation Report on December 15, calling out the Federal Railroad Administration (FRA) and the Pipeline and Hazardous Materials Safety Administration (PHMSA) for their failure to act regarding the safe placement of buffer cars on trains carrying hazardous materials. For the past several years, the Brotherhood of Locomotive Engineers and Trainmen (BLET) has urged the FRA to act on the issue of additional buffer cars on unit trains to help to protect operating crews in the event of a derailment.

“This is not the first time NTSB has issued recommendations regarding the use of buffer cars to reduce the risks of hazardous materials release to train crews,” said Robert Hall, NTSB Director of Railroad, Pipeline and Hazardous Materials. “We believe that it is imperative that these recommendations be implemented to prevent the potential for a catastrophic event.”

The NTSB’s latest recommendation would require all trains to have a minimum of five non-placarded cars between any locomotive or occupied equipment and freight cars transporting hazardous materials, regardless of train length and consist. The recommendation stems from two separate derailments of high hazard flammable trains in Draffin, Kentucky (CSX) on February 13, 2020, and in Fort Worth, Texas (Union Pacific), on April 24, 2019, both of which resulted in breached tank cars and hazardous material fires. The NTSB is investigating both derailments.

The NTSB found that in both derailments, least-protective DOT-111 tank cars were placed in positions that increased the risk of derailment and breaching of the tank cars, resulting in release of their hazardous materials contents. Additionally, in Draffin, Kentucky, the lead locomotives were separated from the hazardous materials tank cars by only one buffer car, which shortened the distance between the breached tank cars and the crewmembers, increasing the risk of injury or death.

In the Draffin derailment, the Pike County deputy emergency management director told NTSB investigators that firefighters observed the train crew grasping to the front of the lead locomotive while a large fire burned near them. He said the cab of the locomotive was engulfed in flames that came within 10 feet of the crew. The deputy emergency management director stated, “the fire was right at them and they appeared to be panicking ... their choices were to go toward the fire or jump into the river.” The train crew entered the water and ultimately was rescued by emergency responders.

The NTSB concluded that the severity of the Draffin, Kentucky, and Fort Worth, Texas, accidents could have been less severe had the DOT-111 tank cars been placed in locations within the train where they were less likely to derail or to sustain accident damage.

In 2015, the BLET petitioned the FRA to take regulatory action to mandate an increased number of buffer cars between the lead locomotive and trailing tank cars that contain oil. Current regulations require five buffer cars on a mixed freight train if the first car contains oil, but through a loophole in the regulations, only one buffer car is required on unit oil trains that could contain over 100 oil tankers. In derailments, locomotives can be a primary ignition source for spilled oil.

“Since engine and train crews occupy the cab of that potential ignition source, there should be as much distance away from the fuel source as possible,” wrote BLET National President Dennis R. Pierce in a letter to the FRA dated April 28, 2015. “Five cars may be insufficient, but one car is obviously not enough.”

The FRA responded to the BLET’s letter by tasking the Agency’s Railroad Safety Advisory Committee (RSAC) with forming a working group to consider revisions to the hazardous materials regulations. The RSAC deadlocked on the subject, and the process eventually ground to a halt due, in part, to carrier intransigence on the buffer car issue.

The NTSB has previously recommended that the FRA develop requirements for the placement of cars carrying poison-inhalation hazard (PIH) materials to lessen their risk of derailment. As a result of the horrific derailment of a Norfolk Southern train in Graniteville, South Carolina, on January 6, 2005, the NTSB issued the following safety recommendation to the FRA: “Require railroads to implement operating measures, such as positioning tank cars toward the rear of trains and reducing speeds through populated areas, to minimize impact forces from accidents and reduce the vulnerability of tank cars transporting chlorine, anhydrous ammonia, and other liquefied gases designated as poisonous by inhalation.”

The NTSB issued a similar safety recommendation to the PHMSA in 2010, after the PHMSA issued a final rule aimed at improving the safety of tank car transportation of hazardous materials which did not include operational requirements for PIH hazardous materials placement in trains. The NTSB again issued similar safety recommendations to both groups following the oil train derailment and massive fire in Casselton, North Dakota, which occurred on December 30, 2013.

President Pierce said the BLET agrees with the NTSB’s latest safety recommendation. “As we have said for years, a change in the rule would require minor, easily accommodated operational changes and not the need for some expensive technology,” President Pierce said. “Continuing to allow the railroads to self-regulate puts the lives of train crews at risk, and could lead to a wholly unnecessary loss of life.”

For a PDF of the BLET’s 2015 letter to the FRA, click here.

For a PDF of the NTSB’s safety recommendation of December 15, 2020, click here.