Jump to content


Photo

TEXRail DMU Procurement


  • Please log in to reply
14 replies to this topic

#11 KevinKorell

KevinKorell

    Board Leader

  • Sr. Admin
  • PipPip
  • 82315 posts
  • Gender:Male
  • Location:Lakewood, NJ
  • Interests:Making America TRAIN again!

Posted 17 October 2017 - 12:04 PM

Fort Worth, TX Star-Telegram, 10/16/17:

 

 

 

Take a sneak peek at TEX Rail trains that will carry riders in Fort Worth next year

 

 

One of the first TEX Rail cars off the assembly line was publicly unveiled last week during a transit exposition in Atlanta — and Fort Worth officials say the vehicle was a hit among those who saw it.

 

 

 

Update



Kevin Korell


OTOL Board Leader


Lakewood, NJ


#12 KevinKorell

KevinKorell

    Board Leader

  • Sr. Admin
  • PipPip
  • 82315 posts
  • Gender:Male
  • Location:Lakewood, NJ
  • Interests:Making America TRAIN again!

Posted 13 November 2017 - 02:07 PM

Fort Worth, TX Star-Telegram, 11/10/17:
 

Why TEX Rail commuter train cars may be safer than older models


 
 
The new passenger train cars being built for the planned TEX Rail commuter line are modern and airy.
 
And although they appear to be much lighter than freight trains that normally run on the tracks, the manufacturer is redistributing the weight to address a problem that has nagged a previous model.

 
More


Kevin Korell


OTOL Board Leader


Lakewood, NJ


#13 KevinKorell

KevinKorell

    Board Leader

  • Sr. Admin
  • PipPip
  • 82315 posts
  • Gender:Male
  • Location:Lakewood, NJ
  • Interests:Making America TRAIN again!

Posted 14 February 2018 - 10:00 AM

<p>Once completed, Fort Worth Transportation Authority&rsquo;s $1 billion TEXRail service will transport passengers to DFW Airport.</p><p>All photos courtesy FWTA</p>The Fort Worth Transportation Authority’s (FWTA) new 27-mile commuter rail line TEXRail will extend from downtown Fort Worth, across northeast Tarrant County, through North Richland Hills and Grapevine, and into Dallas Fort Worth International Airport’s Terminal B. This line, which will begin service in late 2018, is projected to serve more than 9,000 daily riders at nine stations by the end of the first year of operation. By 2035, nearly 14,000 daily riders are projected to ride the system.

The FLIRT 3 (Fast Light Innovative Regional Train) vehicles, built by Stadler Bussnang AG of Switzerland, are the first of this model type to operate in the U.S.
The diesel multiple unit (DMU) trains are configured with an operator cab at either end for bidirectional movement. At the center of the train is a power pack with two diesel engines. This style of train is much quieter than traditional commuter rail, according to Stadler officials. TEXRail vehicle amenities include work tables, lap trays, a quiet car, level boarding, and overhead storage for bags.

FWTA President/CEO Paul Ballard and Sr. VP Bob Baulsir spoke to us about the TEXRail project, the agency’s Master Plan for service improvements, and how it will change the region.

What are some highlights of The T Master Plan with regard to rail service improvements/projects?
Paul Ballard: Improving and enhancing rail service to help more people reach more places. In 2016, the Trinity Railway Express schedule was updated to provide great frequency and extended weekend hours. (FWTA and DART jointly own and operate the Trinity Railway Express.) Changes in the north quadrant of our service in 2017 were designed to tie in with future rail service. Routes are designed for connectivity to future TEXRail stations. TEXRail will provide an excellent opportunity to connect the workforce with better job opportunities along the line.

<p>TEXRail vehicle amenities include work tables, lap trays, a quiet car, level boarding, and overhead storage for bags.</p> How will this plan be funded and what is currently being implemented?
PB: The Transit Master Plan is fully funded through the FFGA and local funds. Work continues across the 27-mile corridor with more than 1,000 workers in the field. Construction includes laying rail, installing new bridges and building new rail stations.

What is the status of the TexRail project?
PB: TEXRail is progressing extremely well. Construction all along the Cotton Belt corridor is on target for us to begin revenue service on schedule. We are planning a special service run on New Year’s Eve, with regular service beginning January 1, 2019.

Our equipment maintenance facility is nearly completed, and we will begin testing our trains in March. We have two trains in Texas, and the remaining six will be delivered in the coming months.

Discuss the initial development of the TexRail project.
PB: Much of the preliminary work occurred before I arrived in 2014, but we have hit significant milestones in the last few years. In 2015, five railroads signed an agreement for TEXRail operations on the Cotton Belt corridor. Late in 2016, we received one of the last Full Funding Grant Agreements (FFGA) from the Federal Transit Administration. The $499.39 million in federal funds completed the local and federal funding for our $1.034 billion commuter rail project. In December 2017, we signed a contract for Positive Train Control, which will enhance safety and improve communications among all trains on the corridor.

What key design/construction considerations were required for the railcars?
Bob Baulsir: We have nine stations along the route, and two of those are existing stations in Fort Worth. We currently utilize those stations for Trinity Railway Express service. Because of the unique design of the TEXRail’s Stadler FLIRT, we have been modifying those platforms for level boarding to provide easy access for riders with bikes, strollers or wheelchairs.

One of the most complicated components of the project is at what we call the “hole in the wall.” We have three levels of transportation options — a highway on top, freight trains on the middle layer and TEXRail and the Trinity Railway Express on the ground level. Part of the construction involves implementing a double shoo-fly to redirect train traffic while we work to prepare for TEXRail.
 
What are some key railcar features?
BB: One of the best features of our diesel multiple unit trains is that we will have a quiet car to give travelers the chance to relax, read or catch up on a project. The Swiss design is unlike the trains people are used to seeing on the tracks. TEXRail’s sleek <p>TEXRail will provide an excellent opportunity to connect the workforce with better job opportunities along the line, according to FWTA President/CEO Paul Ballard (pictured).</p>and innovative design provides a roomy and comfortable ride. Most seats have a pull-down tray and other seats are arranged around a work table. Each seat is equipped with a USB port for charging electronic devices. We also have a roomy ADA-compliant restroom near the center of each train.

Stadler, FLIRT trains developing U.S. presence
The FLIRT trains for TEXRail will become part of an entire fleet of vehicles in the U.S.: Stadler’s latest U.S. contract involves an order for 16 six-car, electrical, double-decker multiple units for the California commuter rail project, Caltrain. The contract, which was signed in August 2016 in San Mateo, Calif., includes an option for another 96 double-decker multiple units, and is valued at a total of $551 million.

These new, high-performance, double-decker multiple units have been built to seat a maximum number of passengers, and will run between San Francisco and San José in Silicon Valley. The first Stadler double-decker train will be delivered to the USA in August 2019 and put into commercial use in 2020 after having passed all the required testing.

Additionally, in October 2017, Stadler broke ground on a new $50 million facility in Salt Lake City, which will be used to assemble trains for the U.S. market.

How will TexRail alleviate congestion and help bolster growth in the region?
BB: We anticipate having 8,000 passengers a day by the end of the first year of service, and our trains will run seven days a week. We won’t be able to alleviate all traffic congestion, but that level of ridership will certainly take a significant number of cars off the road. Riders will benefit by having a streamlined route to the airport and not having to be concerned about getting caught in rush hour traffic.

We are seeing significant growth in terms of transit-oriented development. Having TEXRail in place will also provide growth in terms of passenger mobility to get to better job opportunities.

Tourism will also benefit from our commuter rail line. For travelers with layovers, Grapevine is an easy eight-minute ride away. Visitors can choose from an array of shops and restaurants and get back in plenty of time to make their connections. Fort Worth will be a short train ride away for convention-goers and for travelers who want to visit the area without worrying about driving.

How will the introduction of the TexRail service improve transportation between Fort Worth and DFW Airport?
BB: Currently, riders can ride the Trinity Railway Express part of the way and then take two bus shuttles to get to the airport. TEXRail will streamline the process and deliver travelers to the airport in 52 minutes. The new commuter rail line is essential not only for people trying to catch a flight, but also for employees at the airport call centers and warehouse as well as at the airport itself.

Keywords

Bob Baulsir   commuter rail   Dallas Fort Worth International Airport   FLIRT   Fort Worth Transportation Authority   Paul Ballard   Stadler   TEXRail   

 

Follow @lctmag on Twitter


View the full article

#14 KevinKorell

KevinKorell

    Board Leader

  • Sr. Admin
  • PipPip
  • 82315 posts
  • Gender:Male
  • Location:Lakewood, NJ
  • Interests:Making America TRAIN again!

Posted 26 May 2018 - 01:40 PM

Dallas Innovates, 5/23/18:

 


 

TEXRail Unveils New Commuter Train in Fort Worth

 

 

 

At first glance, the new TEXRail trains look like something out of a science fiction film.

 

There’s no big locomotive chugging black smoke into the air. The FLIRT 3 (Fast Light Innovative Regional Train) glides with almost no noise down the track. But it’s not electric like the Dallas Area Rapid Transit.

 

Article



Kevin Korell


OTOL Board Leader


Lakewood, NJ


#15 lunarwhite

lunarwhite

    Member

  • Members
  • PipPip
  • 276 posts

Posted 12 May 2019 - 11:40 AM

The eighth and final TEXRail FLIRT train has been completed. Stadler took the opportunity to hold a Grand Opening of their new plant in Salt Lake City. And in honor of the date, May 10 2019, the TEXRail train got a name.

https://youtu.be/MHObyq1c6Yg




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users